AMS is not recognizing G27 pedals + Bodnar USB adapter

[longhornjoe]

I'm stumped here and wanted to see if any of you using the same hardware with AMS has come across this before, or has any suggestions.

 I'm using a G27 Wheel & Pedals with the Bodnar USB Pedal adapter and cannot get AMS to recognize the pedals.  It seems to recognize wheel inputs, but nothing on the pedals registers.  

I have the Wheel and Pedals/Bodnar USB plugged in to USB ports on the MoBo.

I've used the Bodnar Calibration software to setup the pedals there.  

Logitech Gaming Profiler (v. 5.10.127) recognizes the pedals separately from the wheel--they register as "Logitech G25 Pedals" next to the "G27 Racing Wheel" in the Profiler > Game Controllers... window--which is expected.  I'm able to calibrate them there, also.  Under "Game Controllers" > "Advanced Settings" I can switch the 'preferred device' between either the wheel or pedals and get the same results in AMS.

In both rF2 and Assetto Corsa with the same setup, the wheel and pedals work perfectly, but when I start AMS it does not seem to recognize them at all.

In AMS under Settings > Controls > Presets, I've tried selecting each of the "Logitech" options.  Under the "Axis" settings all of the "Joy #" Sensitivity settings are set to at least 50%.

If I open and AMS into a window and have the Bodnar configuration program open in another window, I can see the pedals register in the Bodnar config when I press them.  Its as if AMS isn't picking up on the USB port when everything else is.

Is there some other setting (maybe a config in the AMS folders) that I need to look at?

[F1Fan07]

I use the same pedal set up and had an issue a while ago. I forget the solution right now but maybe it'll come to me if I sleep on it.

[F1Fan07]

How many devices to you have listed in joy.cpl?

[longhornjoe]

I see two items listed:
Logitech G25 Pedals
G27 Racing Wheel

[F1Fan07]

Well that's fine. The limit should be 6 controllers for AMS.

I remembered that my problems were related to weird calibration sensitivity. You might have to check/ask at the Reiza forums.

[AngeloDS]

Dont know if it helps.

steamcommunity.com/app/431600/discussions/0/405693392913804492/


steamcommunity.com/app/431600/discussions/0/405692758723830981/

[longhornjoe]

Thanks guys. I've spent hours scouring Google and trying to figure this out. For the meantime, I've disconnected the Bodnar USB cable and gone back to the default, single USB, G27 setup with the pedals connecting through the wheel. That seems to be working fine, so it's got to be some combination with AMS, the Bodnar USB and/or my USB ports.

I'm going to take this to the AMS Support forum, though, but it's to focus on Adelaide.

[F1Fan07]

I wonder if it's something to do with the Logitech software?

I use Logitech Gaming Software (different version than you I think) for my headset and keyboard (my pedals are not listed in it)... no idea if that enables the pedals or not as I installed LGS before checking that my pedals worked on this new install.