Post by Deleted on Oct 2, 2013 1:29:37 GMT -8
So before last night's Spazcar race my Act Labs RS2006 pedal set was acting up - the gas wasn't displaying all the way. I swapped to my spare Logitech G25 pedals (which fyi can plug straight in to a G27 - G27 pedals can also plug into a G25) and despite the gas spring being basically gone I was able to get it done in 2 minutes without getting out of the game. After the race I discovered that the DIN plug for the steering, which is meant to prevent excess inputs or 'noise' in the USB Adapter towards pedal or wheel inputs (if you have an Act Labs wheel), was actually causing these pedal problems. Ironic considering they caused a problem they were supposed to prevent - GO FIGURE! Thought you all might get a kick out of that - check out this link if you want to know what I mean (http://www.act-labs.com/pdf/USB%20Adapter%20Manual_3%20in%201_.pdf)