Jeff H.
Race Coordinator
Posts: 1,237
|
Post by Jeff H. on Jul 27, 2012 4:25:31 GMT -8
I'm thinking of going with fixed setups to make it interesting. (If I can figure out how!). Thoughts?
|
|
F1Fan07
Race Director
Ludicrous speed. Gone to plaid.
Posts: 9,366
|
Post by F1Fan07 on Jul 27, 2012 7:43:31 GMT -8
Works for me!
|
|
Seahawks1Fan
Race Director
rF name: Jason Hawks
Posts: 5,614
|
Post by Seahawks1Fan on Jul 27, 2012 8:20:28 GMT -8
I agree this should be a fixed setup event. The default tune feels pretty good as is.
|
|
|
|
Post by boza on Jul 27, 2012 13:52:51 GMT -8
+1 on the fixed set ups
|
|
Dan W.
Race Steward
Posts: 5,378 
|
Post by Dan W. on Jul 27, 2012 14:07:46 GMT -8
|
|
F1Fan07
Race Director
Ludicrous speed. Gone to plaid.
Posts: 9,366
|
Post by F1Fan07 on Jul 27, 2012 14:16:25 GMT -8
Ya, one less series I have to tune for the better. Run what you brung!
|
|
|
|
Post by spazsterian on Jul 27, 2012 15:45:40 GMT -8
I agree, and i think i remember how to do it Jeff , so if you need help ....um... i might remember..lol
|
|
|
|
Post by zero7159 on Jul 27, 2012 16:22:42 GMT -8
+1
Sent from my HTC One X using ProBoards
|
|
|
|
Post by kuruptcdn on Aug 31, 2012 2:12:59 GMT -8
is this fixed setup confirmed? if so can steering lock and psi be adjusted?
|
|
|
|
Post by smokey on Aug 31, 2012 2:39:29 GMT -8
no chance of having adjustable brakes? but the fixed setup is awsome
|
|
Jeff H.
Race Coordinator
Posts: 1,237
|
Post by Jeff H. on Aug 31, 2012 4:09:51 GMT -8
Yep, we're running a fixed setup which is the default tune. It does allow for steering lock adjustment only. Keeping it simple!!
|
|
|
|
Post by Jarhead on Aug 31, 2012 4:23:18 GMT -8
Even without adjustable brakes in the garage menu, there is a way to adjust the brake sensitivity, it just doesn't have as much range.
Go into the settings tab at the top, then click on the controllers tab. First check the Mappings tab to see which axis your brake is mapped to. Then click on the controller 1 or controller 2 tab whichever is for your brake (most likely will be controller 1 unless you have Fanatec CSPs plugged directly into comp). In that controller tab you can adjust the sensitivity of the axis you will use for the brakes. I use this as my final brake adjustments as it is a fine adjustment.
|
|
