|
|
Post by smokey on Aug 2, 2012 8:48:48 GMT -8
is this right fellas havent touched the "trigger" bit though sorry to be a pain   |
|
Seahawks1Fan
Race Director
rF name: Jason Hawks
Posts: 5,614
|
Post by Seahawks1Fan on Aug 2, 2012 9:17:20 GMT -8
You will want to start at 34297, not 34397.
I personally open each port individually, but this should work also.
|
|
|
|
Post by smokey on Aug 2, 2012 9:35:39 GMT -8
|
|
Seahawks1Fan
Race Director
rF name: Jason Hawks
Posts: 5,614
|
Post by Seahawks1Fan on Aug 2, 2012 10:32:46 GMT -8
That appears to be correct. I would leave the Protocols to Both rather than specifying each TCP and UDP. That's how I have it set up anyway and hasn't given me any issues.
|
|
|
|
Post by smokey on Aug 2, 2012 10:40:37 GMT -8
ok thank you Hawks & f1 and will do hawks
|
|
|
|
Post by smokey on Aug 4, 2012 12:54:14 GMT -8
ok tried to get into V8 practice no dice... same as enduracers no dice hmmmm i wonder if me port forwarding has hurt my joining youse as it kept timing out at password....
|
|
Seahawks1Fan
Race Director
rF name: Jason Hawks
Posts: 5,614
|
Post by Seahawks1Fan on Aug 4, 2012 12:55:32 GMT -8
That shouldn't effect you joining. Are you using the same install of rFactor that you were using before?
|
|
|
|
Post by smokey on Aug 4, 2012 12:59:19 GMT -8
yeah mate same one  |
|
|
|
Post by Kelly G on Aug 4, 2012 13:11:37 GMT -8
Don't you also need 34297 on TCP opened up as well? I see the UDP but not TCP.
Here is how I have mine configured for my servers:
34297 - Both
34447 - TCP
34397 - UDP
Cheers!
|
|
|
|
Post by smokey on Aug 5, 2012 6:35:25 GMT -8
ok so i un portforwarded my modem/router and bam i can get into our other rooms again no worries ive still got room setup on my pc as server with no port forwrding and still shows up in ISI so see if mate can join it tomorrow no worries. ive sent whitewolf my name, password & ip details |
|
i changed them tbh Hawks if ya meant something else got me fookd 
